6040 CNC Wood Router Aluminum Frame Rotary Axis 57 Step Motor Completo Kit for Cutting PCB PVC Milling Laser Machines

6040 CNC Wood Router Aluminum Frame Rotary Axis 57 Step Motor Completo Kit for Cutting PCB PVC Milling Laser Machines

Introduction

The CNC router frame need self-assembled for DIY amateur;

The cnc router is designed for large areaengraving work such as Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc. So, you can do engraving work at office or home.

Model and Technical Parameters

The fourth axis: including the Rotary axis and the tailstock, with stepping motor and 3 jaw 65mm chuck, and the tailstock is retractable. The extension length of tailstock is 30mm.

The bottom plate and vertical plate are made of PVC plate. The new 57 step motor has a driving current of 2.4a and a synchronous wheel reduction ratio of 1 to 4.

Technical parameters of control box:

1, 3 axis control board, current 3a, 8 subdivision (factory set OK, the control board can expand the fourth axis, the fifth axis).

2. The governor of the spindle motor outputs DC48V (OK has been set at the factory, and 0-110vdc can be set as required).

3. The three-axis wiring is a standard 4-core aviation plug, and the spindle motor wiring is a standard 2-core aviation plug.

4. One free power supply line and one parallel port line respectively, which can be used when the hand is powered on

5. Control software: Mach2, Mach3, kcaM, etc